Lubricant oil in the process of lubrication equipment should note the following:
1. to choose qualified lubricants. Must be in accordance with the instructions, filling oil in particular should pay attention to more imports, two-stroke, supercharged engine.
2. Should always check the sump oil level, and maintain the oil level is too high nor too low. The newly built engine should be added a little more oil. By running, stop and check the oil level, multi-release, ranging from Tim.
3. Before starting the engine in winter, the application of hand cranks turns a few laps, and then starts the engine, so that the ministries are adequately lubricated to avoid burning cylinder engine failure.
4. In operation, should be noted that the oil pressure and oil temperature, found that negative phenomena should stop in time to check, and troubleshooting.
5. Observe and record the oil consumption, when the abnormal situation should immediately find out the reason, and troubleshooting.
6. The regular cleaning of lubrication system components (coarse filter, fine filter, oil radiator, oil pan, etc.) to ensure the lubrication system is often clean and smooth.
7. Found that the lubricant deterioration discoloration, the sump deposition of excessive or oil mixed with water, fuel oil should be replaced, and shall perform summer and winter alternating seasonal oil changes.