0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump

Model: DB-63 Series -211007
Place of Origin: Zhejiang,China (Mainland)
Type: Others
Certification: Others
Brand Name: EGMEC
Product: DB Series of single line lubrication grease pump with portable cart
Pressure measurement range: Within 0.1MPa ~ 200MPa
Nominal pressure rate: 100bar
Pressure valve adjustment: 0-100bar
Grease feeding: 63ml/min.
Grease tank volume: 8L
Medium: The cone into the degree of 250 to 350 (25 °C, 150g) the 1/10mm grease (NLGI0 # -2 #)
Motor power supply: 0.25kw
Motor speed: 1400r/min
Application: Without cart for DB series

inquiry

basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Trade Term:FOBProduction Capacity:600
Payment Terms:L/C, D/P, D/A, T/T, WUPacking:Standard packing for...
Min. Order:1 Set/SetsDelivery Date:Depending quantity
Means of Transport:Ocean, Air, Land

Brief introduction:

The DB series of 0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump are used to the lubrication frequency is low, nominal pressure of 10MPa, the lubrication cycle is longer or equipment scattered lubrication points, lubrication points, 80 points below the single line of small dry oil lubrication system, through the chip to the oil or grease gun to lubrication points Feeding grease especially suitable for the transport machinery and equipment of the port.

Ordering code:

DB – 63
DB= Single Line Grease Pump
Z= With cart
63= Grease feeding 63mL/ min.
Technical data:

Model
Pressure rate(bar)
Grease feeding(mL/min.)
Reservoir
volume (L)
Piston diameter
(mm)
Piston numbers
Motor
Weight
(kg)
Model
Power (Kw)
Speed (r/min)
DB-63
100
63
8
8
4
A06324
0.25
1400
23
DBZ-63
52
The use of media for Cone Penetration degree of 250 to 350 ( 25 ° C , 150g) the 1/10mm grease ( NLGI0 # -2 #) .

Produce Dimensions:
0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump

How to use the DB series

0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump
0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump

1. The singlet dry pump should be installed in a suitable ambient temperature, little dust, easy to fill the grease, adjustment, inspection and maintenance are all convenient occasions.
2. First deceleration box to add one liter No. 50 machine oil before operation.
3. Fill grease to the inside of the oil storage must use the SJB-D60 manual pumps or DJB - 200 electric fuel pumps from the oil storage refueling port , oil storage inside. Forbidden to start the 0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump without grease
4. Connection the electronic line as per the the cover of the motor fan rotation indication, wiring shall not reverse.
5. The fuel filler of the filter should be cleaned regularly.
6. The pressure regulating valve on the pump can be adjusted in the range of 0 ~ 100bar, when in use must not exceed the pump 's nominal pressure of 100bar .
7. When the pump pressure fluctuations, fuel is abnormal, can unscrew the the deflated screw on the pump until the discharge air, grease normally overflow out to tighten the deflated screws.
8. In 0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump should be kept in clean surroundings, uncovering fill grease to prevent dirt into the pump housing affecting the normal working is strictly prohibited.

Category: Portable Grease Pumps

Related Category: Grease Lubrication Pumps  Electric Grease Pumps  Grease Injection Pumps  Manual Grease Pumps  Electric Lubrication Pumps