Note: The use of media for not less than 265 cone penetration ( 25 ° C , 150g ) 1/10mm grease or lubricant viscosity grades than N68 working environment temperature of -20 to 80 ℃ .
How to use DDRB-N 31.5Mpa High Pressure Of Multi- point Lubrication Electric Grease Pump:
1. This type of 31.5Mpa High Pressure Of Multi- point Lubrication Electric Grease Pump should be installed in a suitable ambient temperature, low dust, to facilitate inspection, maintenance and convenient grease filling the place.
2. Grease filling to the oil reservoir must use fuel pumps from oil storage, fuel filler added , non-uncover added without filtering using the medium.
3. The grease storage cylinder wall spin rotation licensing requirements electrical wiring, may not be reversed.
4. To the number of ports in the range of 1 to 14 arbitrary choice , according to the device needs no oil pressure piston pump components can be removed, the screw holes with M20 × 1.5 screw plug.
5. To the adjustment of the amount of grease, the figure below regulatory sequences threaded sleeve 3 can be obtained.