400bar/5800psi High Pressure Lubricating Grease Pump

Model: HB-P Series -211015
Place of Origin: Zhejiang,China (Mainland)
Type: Others
Certification: Others
Brand Name: EGMEC
Product: HB series of 1.1KW-2.2KW power motor, 380voltage high pressure lubricating grease pump
Ordering code: HB-P200Z/ 400Z/ 800Z series
Operation pressure: 400 / 200bar
Motor voltage: 380V
Motor power supply: 1.1 or 2.2kw
Tank Volume: 60L to 100L
Operation temperature: 10~70℃
Quality control: 100% Testing before delivery
Warranty: One year guaranty
Medium: The cone penetration not less than 265 (25°C, 150g) 1/10mm grease (NLGI0 # 3 #)


basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Trade Term:FOBProduction Capacity:500
Payment Terms:L/C, D/P, D/A, T/T, WUPacking:Standard packing for...
Min. Order:1 Set/SetsDelivery Date:Depending quantity
Means of Transport:Ocean, Air, Land

Brief introduction:
The 400bar/5800psi High Pressure Lubricating Grease Pump are suitable for lubrication points, with a wide range of distribution, to the high frequency of grease, nominal pressure 40 (20MPa) in single or dual-line dry ( lean) oil lubrication system, as a lubricant supply device can also be equipped with a mobile trolley oil, hose, oil gun and cable mobile electric lubrication pump device for use in low frequency, less lubrication points to the large amount of oil and not easy to centralized lubrication stand-alone device, move to the grease , the grease storage barrel set grease level automatic alarm device, if accompanied by a corresponding electrical control box also achieve automatic control and monitor the system.
Lubricating Oil Pump
400bar/5800psi High Pressure Lubricating Grease Pump

Ordering code:
HB P 200 G - A
HB= Lubrication Grease Pump
P= 400bar ; D= 200bar
200= Grease feeding: 200mL/min; 400mL/min; 800mL/min
G= Medium: Grease
Outline type= A type; B type; C type; D type

Technical data:
Grease feeding (mL/min)
Motor power
The use of medium for the cone penetration not less than 220 (25 ° C, 150g) 1/10mm grease (NLGI0 # ~ 3 #) not less than N68 lubricant viscosity grade.

400bar/5800psi High Pressure Lubricating Grease Pump of HB-P series Outline Dimensions:
Lubricating Oil Pump

Lubricating Oil Pump
Lubricating Oil Pump

Lubricating Oil Pump

How to use the HB-P series 400bar/5800psi High Pressure Lubricating Grease Pump:
1. Lubrication pump should be installed vertically and fixed for easy maintenance and less dust, and pay attention to the operating temperature range of -20 ° C to +65 ° C ambient temperature suitability pump.
2. The pump as installed in the lubrication system center position to shorten the system the length of the pipe, to maintain a minimum pressure drop, in order to ensure that the pump generates a pressure sufficient to overcome the back pressure of the lubricating points.
3. The motor shall rotate in a clockwise direction
4. The pump must use clean grease, lubricant containing impurities is often the main reason for failure of pumps and system, use electric pumps to the grease storage tank supplemental lubricant from electric lubrication pump grease filling port. Pump before initial filling grease, a good idea to add some lubricants, liquid lubricants will be filled with all the parts, is conducive to exclude air. The lubricating parts if not use lubricant, the pump must be running to grease reaches the end of the pipe until the presence of air.
5. Gear box should be filling 50 # mechanical standard indicated level before the grease pump operation.
6. The pipelines, especially from the pipeline to the oil to the lubrication points and lubricating parts bearing should advance filled with lubricating grease, and then install it.
7. The HB-P series of electric lubrication pump is available for indoor installation, protection way must be taken to use the outdoor or harsh environment applications..

Category: High Pressure Grease Pumps

Related Category: Grease Injection Pumps  Manual Grease Pumps  Electric Lubrication Pumps  Manual Lubrication Pumps  Hand Grease Pumps