Electronic Pressure Transmitter

Model: MPT-002 Series -321013
Place of Origin: Zhejiang,China (Mainland)
Product: Electronic pressure transmitter support CANopen protocol and CAN open net type
Pressure measurement range: Within 0.2MPa ~ 35MPa
Max. operation temperature: -40℃ ~ 85℃
Power supply: 10-30VDC
Analog output signal: 0-5VDC
Insulation: >100MΩ at 50V
Response time: ≤10ms
Pressure port: M20×1.5, G1/2, G1/2, NPT1/2 optional
Electromagnetic radiation: EN50081-1/-2
Electromagnetic sensitivity: EN50082-2

inquiry

basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Trade Term:FOBProduction Capacity:120000
Payment Terms:L/C, D/P, T/T, WUPacking:Standard packing...
Min. Order:100 Piece/Pieces
Means of Transport:Ocean, Air, Land



Brief introduction:

MPT-002 series electronic pressure transmitter is the communication of a CAN bus protocol, the use of imported high stability of the pressure sensor core and dedicated CAN bus circuit can be realized CANBUS- based two-way communication.
CAN bus is a multi-master network protocol , the network took a node can be at any one time to take the initiative to send messages to other nodes on the network, the priority of the packet arbitration minimizes the packet transmission delay and avoid conflict. CAN direct communication distance up to 10Km, and communication rates up to 1Mbps.

Ordering:


Input signal

Connection type

Pressure portthreads

Addition

K= CAN Line

H=0-5V

C=Cableline outlet

Ga=G1/4 thread

Gb=G1/2 thread

Ma=M20X1.5 face seal thread

Mb=M20X1.5 waterline seal thread

Vd=3.6VDC

A=Absolute pressure

S=Sealed gauge pressure

Ua=0.25%F.S

Ub=0.5%F.S


Specification:


Item

Description

Pressure range

Within 0.2MPa ~ 35MPa

Overload pressure

1.5 Times the ratedpressure

Damage pressure

3 Times the ratedpressure

Accuracy

±0.25%F.S

Stability

Max. value: 0.25%F.S

Operationtemperature

-40℃~ 85℃

Compensationtemperature

-10℃~70℃

Compatible media

All corrosive mediacompatible with 1Cr18Ni9Ti

Quiescent operatingcurrent

Current consumption≤ 10m A meter of non- sampling

Analog outputsignal

0-5VDC

Supply

10-30VDC

Insulation

>100M Ω at 50V

Electricalconnection

The water outlet (five waterproof sealed), shell protection IP68

Shell protection

IP67

Response time

≤10ms

Communicationdistance

≤1 0 K m

Communication speed

≤1Mbps

Specificationsupports

CAN2.0 A and CAN2.0B

Pressure portthreads

M20×1.5,G1/2, NPT1/2

Protocol support

Support CANopenprotocol and CAN open net

Form of pressure

G= Gauge pressure/ A= Absolute pressure                      / S= Sealed gaugepressure

Electromagneticcompatibility

Electromagnetic radiation: EN50081-1/-2;

Electromagnetic sensitivity: EN50082-2



Dimensions:




Connector type

Plug

V+

V-

CAN+

CAN-

Wire

Red wire

Black wire

Blue Wire

Green Wire

Category: Hydraulic Pressure Sensors