The KM series of grease lubricant distributor is the single line progressive distributor consists of carbon and alloyed structural steel manufacturing in the supply end of elements and 3~8 according to design needs to determine the amount of grease and the intermediate combinations of the number of ports.
The outlet ports of lubricant distributor are set on the two sides and also set in the above prepared to export, the intermediates are equipped with non-return valve in the outlet, can completely prevent resulting back pressure grease lubrication points upstream, ensure the grease outlet to quantitative, accurate.
Grease feeding ml/Cycle
10Mpa to 21Mpa
Medium: Penetration not lower than 265 (25°c, 150g) or 1/10MM grease viscosity grade than N120 oil: suitable for ambient temperatures of-10°c ~80°c.
The grease squeezd by lubrication pump, supply flow press above photo shows the direction of the arrow drive piston A, B, C respectively.
Piston A, B left cavities in the effects of grease pressure in the right stationary, C into the lower right chamber pressures for piston, grease started moving to the left.
Lubricant grease flows promote the piston C left, lubricants exports to NO.1 in the cavities left by external piping to the lubrication point. The piston C movement to the left when the piston B cavity right was injected into lubricant grease.
Lubricant grease forwards the piston B to move to the left, lubricants exports to NO.2 in the cavities left by external piping to the lubrication point. As the piston B starts moving right to left when the pistons A cavity into the lubricant.
Lubricant grease forwards the piston A move to the left, the left cavity of the lubricant to the NO.3 export external piping to the lubrication point. As the piston A startS moving to the left when the piston C right cavity into the lubricant.
The inflow of the lubricant is to promote the piston C moves to the right, the right chamber of the lubricant pressure to the NO.4 discharge port via an external pipe to send to the lubrication points. The grease is pushed to enter the the piston B left chamber when the piston C moves to the right limit lubricant.
The inflow of the lubricant to promote position B rightward movement of the piston, the lubricant of the right chamber pressure to NO.5 outlet, external pipe fed to the lubrication points. When piston A piston B to move to the right limit the left chamber began to enter the lubricant.
The inflow of lubricant pushes piston A to the right chamber of the lubricant pressure to NO.6 outlet pipe , via the external is sent to the lubrication points. When the piston A moves to the return to the initial state, continue to repeat the action to the right limit.
The KM series of grease lubricant distributor
Grease Lubricant Distributor Of KM Series Dimensions:
KM Series Dimensions Without Cycle Indicator And Switch
Max. outlet ports
Indicator for overpressure:
Flow relief Indicator :
The grease lubricant distributor of km series dimension of flow relief indicator is installed in the badly environment and easily blocked preparing outlet ports of each distributor, when the lubrication points or clogged , the pressure is abnormally elevated exceeds a predetermined value , the distributor is blocked point for grease spill out from the overflow outlet, by view of overflow point is the blocking point of failure as an examination.
Only apply to continuous operation position, no other distributor locations.
Outlet remark description:
T: As the basic standard, there are two grease outlet ports between the body sides.
S: Only one outlet port (T type, 2 outlet ports connected) , grease amount of the T-shaped twice, grease flows from left or right side.
LC: No left outlet port, view the right outlet port from the grease supply direction, and merge the grease with the adjacent rear element.
RC: No right outlet port, view the right outlet port from the grease supply direction, and merge the grease with the adjacent rear element
2C: No outlet ports, view the right outlet port from the grease supply direction, and merge the grease with the adjacent rear element
How to Order Grease Lubricant Distributor Of KM Series:
Please offer the code completely: KM-3(15T+25T2C+30S)R
Please provide the complete model number when ordering your subscription and provide the join map as follows: