Lincoln Lubricant Distributor

Model: KL Series -221014
Place of Origin: Zhejiang,China (Mainland)
Type: Others
Certification: CE
Brand Name: EGMEC
Product: Progressive Grease Lubricant Distributor With Single Line
Grease outlet type: Single Line Progressive Lubrication System
Injector connector thread: Inlet with Rc 3/8 and Outlet with Rc 1/4
Max. Pressure: 100bar - 210bar
Feeding volume: 0.410 - 4.920mL/cycle
Working temperature: -10~+80℃
Medium: Cone penetration not less than 265 (25°C, 150g) 1/10mm grease
Quality testing standard: JB/ZQ4550-97
Surface treatment: Chrome plated or Zinc plated optional
Special dimensions design: Consult us

inquiry

basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Trade Term:CIFProduction Capacity:5000
Payment Terms:L/C, D/P, D/A, T/T, WUPacking:Standard packing for...
Min. Order:10 Set/SetsDelivery Date:Depending quantity
Means of Transport:Express, Ocean, Air, Land

Brief introduction:
The KL series of lubricant distributor are a single main line, usually consisting of a piston pump lubricant into the main pipelines, and oil supply through the single-line to the oil filter in a one-to-one, one for each grease between greasing lubrication points are independent of each other. Oil filter is equipped with sensors, detecting each signal to grease to the grease, if not grease, will plug the output signal, it is usually affected by distance.
The KL lubricant distributor series are available for the position of grease consumption of different lubrication points, to grease frequently single centralized lubrication system, composed of double partition control lubrication of distribution system.
The KL series of lubricant distributor is the single line progressive distributor consists of carbon and alloyed structural steel manufacturing in the supply end of elements and 3~8 according to design needs to determine the amount of grease and the intermediate combinations of the number of ports.
The outlet ports of lubricant distributor are set on the two sides and also set in the above prepared to export, the intermediates are equipped with non-return valve in the outlet, can completely prevent resulting back pressure grease lubrication points upstream, ensure the grease outlet to quantitative, accurate.

Ordering code:
Lincoln Lubricant Distributor

Specification:

Model
KL
Piston type
25T
25S
50T
50S
75T
75S
100T
100S
125T
125S
150T
150S
Grease feeding ml/Cycle
0.410
0.820
0.820
1.640
1.230
2.460
1.640
3.280
2.050
4.100
2.460
4.920
Outlet port
2
1
2
1
2
1
2
1
2
1
2
1
Max. pressure
10Mpa to 21Mpa
Medium: Penetration not lower than 265 (25°c, 150g) or 1/10MM grease viscosity grade than N120 oil: suitable for ambient temperatures of-10°c ~80°c.

Operation description:
Lincoln Lubricant Distributor

The grease squeezd by lubrication pump, supply flow press above photo shows the direction of the arrow drive piston A, B, C respectively.
Piston A, B left cavities in the effects of grease pressure in the right stationary, C into the lower right chamber pressures for piston, grease started moving to the left.

Lincoln Lubricant Distributor
Lubricant grease flows promote the piston C left, lubricants exports to NO.1 in the cavities left by external piping to the lubrication point. The piston C movement to the left when the piston B cavity right was injected into lubricant grease.

Lincoln Lubricant Distributor
Lubricant grease forwards the piston B to move to the left, lubricants exports to NO.2 in the cavities left by external piping to the lubrication point. As the piston B starts moving right to left when the pistons A cavity into the lubricant.

Lincoln Lubricant Distributor
Lubricant grease forwards the piston A move to the left, the left cavity of the lubricant to the NO.3 export external piping to the lubrication point. As the piston A startS moving to the left when the piston C right cavity into the lubricant.

Lincoln Lubricant Distributor
The inflow of the lubricant is to promote the piston C moves to the right, the right chamber of the lubricant pressure to the NO.4 discharge port via an external pipe to send to the lubrication points. The grease is pushed to enter the the piston B left chamber when the piston C moves to the right limit lubricant.

Lincoln Lubricant Distributor
The inflow of the lubricant to promote position B rightward movement of the piston, the lubricant of the right chamber pressure to NO.5 outlet, external pipe fed to the lubrication points. When piston A piston B to move to the right limit the left chamber began to enter the lubricant.

Lincoln Lubricant Distributor
The inflow of lubricant pushes piston A to the right chamber of the lubricant pressure to NO.6 outlet pipe , via the external is sent to the lubrication points. When the piston A moves to the return to the initial state, continue to repeat the action to the right limit.

The KL series of lubricant distributor
Lubricant Distributor Of KL Series Dimensions:
Lincoln Lubricant Distributor

KL Series Dimensions Without Cycle Indicator And Switch

Model
Element numbers
A
B
C
Inlet thread
Outlet thread
Max. outlet ports
Weight (kg)
L
M
E
KL-3
1
3
1
125.6
141.6
168
Rc3/8
Rc1/4
6
11.1
KL-4
1
4
1
154
170
196
8
13.3
KL-5
1
5
1
182.4
198.4
225
10
15.5
KL-6
1
6
1
210.8
226.8
253
12
17.7
KL-7
1
7
1
239.2
255.2
282
14
19.9
KL-8
1
8
1
267.6
283.6
310
16
22.1


Indicator for overpressure:
Lincoln Lubricant Distributor

Flow relief Indicator :
Lincoln Lubricant Distributor

The grease lubricant distributor of km series dimension of flow relief indicator is installed in the badly environment and easily blocked preparing outlet ports of each distributor, when the lubrication points or clogged , the pressure is abnormally elevated exceeds a predetermined value , the distributor is blocked point for grease spill out from the overflow outlet, by view of overflow point is the blocking point of failure as an examination.
Lincoln Lubricant Distributor
Only apply to continuous operation position, no other distributor locations.
Outlet remark description:
T: As the basic standard, there are two grease outlet ports between the body sides.
S: Only one outlet port (T type, 2 outlet ports connected) , grease amount of the T-shaped twice, grease flows from left or right side.
LC: No left outlet port, view the right outlet port from the grease supply direction, and merge the grease with the adjacent rear element.
RC: No right outlet port, view the right outlet port from the grease supply direction, and merge the grease with the adjacent rear element
2C: No outlet ports, view the right outlet port from the grease supply direction, and merge the grease with the adjacent rear element.

How to Order Lubricant Distributor Of KL Series:
Please offer the code completely: KL-3(15T+25T2C+30S)R
Please provide the complete model number when ordering your subscription and provide the join map as follows:
Lincoln Lubricant Distributor

Category: Lincoln Lubrication Distributors

Related Category: Lubrication Divider Blocks  Lubrication Distributor  Progressive Distributors  Lincoln Divider Valves  Lubrication Divider Valves