Lubricant Distributor

Model: KJ Series -221012
Place of Origin: Zhejiang,China (Mainland)
Type: Others
Certification: CE
Brand Name: EGMEC
Product: One Line Progressive Lubricant Distributor
Grease outlet type: One Line
Injector connector thread: Rc 1/8
Max. Pressure: 70bar - 210bar
Feeding volume: 0.082 - 0.0328mL/cycle
Working temperature: -10~+80℃
Medium: Cone penetration not less than 265 (25°C , 150g) 1/10mm grease
Quality testing standard: JB/ZQ4550-97
Surface treatment: Chrome plated or Zinc plated optional
Special dimensions design: Consult us

inquiry

basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Trade Term:CIFProduction Capacity:3000
Payment Terms:L/C, D/P, D/A, T/T, WUPacking:Standard packing for...
Min. Order:5 Set/SetsDelivery Date:Depending quantity
Means of Transport:Express, Ocean, Air, Land

Brief introduction:
The lubricant distributor of KJ series are only a single main line, usually consisting of a piston pump lubricant into the main pipelines, and oil supply through the single-line to the oil filter in a one-to-one, one for each grease between greasing lubrication points are independent of each other. Oil filter is equipped with sensors, detecting each signal to grease to the grease, if not grease, will plug the output signal, it is usually affected by distance.
The KJ lubricant distributor series are available for the position of grease consumption of different lubrication points, to grease frequently single centralized lubrication system, composed of double partition control lubrication of distribution system.

Ordering code:
Lubricant Distributor

Specification:
Model
KJ
Piston type
5T
5S
10T
10S
15T
15S
10T
Grease feeding ml/Cycle
0.082
0.164
0.164
0.328
0.246
0.492
0.164
Outlet port
2
1
2
1
2
1
2
Max. pressure
70bar to 140bar








Medium: Penetration not lower than 265 (25 ° c, 150g) or 1/10MM grease viscosity grade than N120 oil: suitable for ambient temperatures of-10°c ~80°c.
Operation description:
Lubricant Distributor

The grease squeezd by lubrication pump, supply flow press above photo shows the direction of the arrow drive piston A, B, C respectively.
Piston A, B left cavities in the effects of grease pressure in the right stationary, C into the lower right chamber pressures for piston, grease started moving to the left.
Lubricant Distributor
Lubricant grease flows promote the piston C left, lubricants exports to NO.1 in the cavities left by external piping to the lubrication point. The piston C movement to the left when the piston B cavity right was injected into lubricant grease.

Lubricant Distributor
Lubricant grease forwards the piston B to move to the left, lubricants exports to NO.2 in the cavities left by external piping to the lubrication point. As the piston B starts moving right to left when the pistons A cavity into the lubricant.
Lubricant Distributor
Lubricant grease forwards the piston A move to the left, the left cavity of the lubricant to the NO.3 export external piping to the lubrication point. As the piston A startS moving to the left when the piston C right cavity into the lubricant.

Lubricant Distributor
The inflow of the lubricant is to promote the piston C moves to the right, the right chamber of the lubricant pressure to the NO.4 discharge port via an external pipe to send to the lubrication points. The grease is pushed to enter the the piston B left chamber when the piston C moves to the right limit lubricant.

Lubricant Distributor
The inflow of the lubricant to promote position B rightward movement of the piston, the lubricant of the right chamber pressure to NO.5 outlet, external pipe fed to the lubrication points. When piston A piston B to move to the right limit the left chamber began to enter the lubricant.

Lubricant Distributor
The inflow of lubricant pushes piston A to the right chamber of the lubricant pressure to NO.6 outlet pipe , via the external is sent to the lubrication points. When the piston A moves to the return to the initial state, continue to repeat the action to the right limit.
Lubricant distributor of KJ series dimensions:
Lubricant Distributor

KJ Series Dimensions Without Cycle Indicator And Switch
Model
Element numbers
A
B
C
Inlet thread
Outlet thread
Max. outlet ports
Weight
L
M
E
KJ-3
1
3
1
67.6
87.6
91.1
Rc1/8
Rc1/8
6
1.3kg
KJ-4
1
4
1
85.2
105.2
108.7
8
1.5kg
KJ-5
1
5
1
102.8
122.8
126.3
10
1.8kg
KJ-6
1
6
1
120.4
140.4
143.9
12
2.0kg
KJ-7
1
7
1
138
158
161.5
14
2.3kg
KJ-8
1
8
1
155.6
175.6
179.1
16
2.5kg


Indicator for overpressure:
Lubricant Distributor

Flow relief Indicator :
Lubricant Distributor

The KJ series of flow relief indicator for lubricant distributor is installed in the badly environment and easily blocked preparing outlet ports of each distributor, when the lubrication points or clogged , the pressure is abnormally elevated exceeds a predetermined value , the distributor is blocked point for grease spill out from the overflow outlet, by view of overflow point is the blocking point of failure as an examination.
Only apply to continuous operation position, no other distributor locations.
Lubricant Distributor
Outlet remark description:
T: As the basic standard , there are two grease outlet ports between the body sides.
S: Only one outlet port (T type, 2 outlet ports connected ) , grease amount of the T-shaped twice, grease flows from left or right side.
LC: No left outlet port, view the right outlet port from the grease supply direction, and merge the grease with the adjacent rear element.
RC: No right outlet port, view the right outlet port from the grease supply direction, and merge the grease with the adjacent rear element
2C: No outlet ports, view the right outlet port from the grease supply direction, and merge the grease with the adjacent rear element

How to Order Lubricant distributor of KJ series:
Please offer the code completely: KJ-3(15T+25T2C+30S)R
Please provide the complete model number when ordering your subscription and provide the join map as follows:
Lubricant Distributor

Category: Lincoln Lubrication Distributors

Related Category: Lubrication Divider Blocks  Lubrication Distributor  Progressive Distributors  Lincoln Divider Valves  Lubrication Divider Valves