Modular Lubrication Progressive Distributor Block

Model: SSV12 Series -221025
Place of Origin: Zhejiang,China (Mainland)
Type: Others
Certification: CE
Brand Name: EGMEC
Product: Progressive Distributor Blocks For Lubrication Equipment
Series number: SSV12 Series
Number of outlets: 12 ports
Nominal pressure: 300bar
Flow rate: 800mL/min.
Inlet connector thread: Outlet with Rc 1/8
Feeding volume: 0.2mL/cycle
Medium: Viscosity grade lubricants greater than N68
Quality testing standard: JB/ZQ4550-97standard
OEM or ODM design: Consult us

inquiry

basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Trade Term:CIFProduction Capacity:5000
Payment Terms:L/C, D/P, D/A, T/T, WUPacking:Standard packing for...
Min. Order:20 Set/SetsDelivery Date:Depending quantity
Means of Transport:Express, Ocean, Air, Land

Brief introduction:

The SSV12 series modular lubrication progressive distributor block IS available for the lubrication equipment of operation pressure with 300bar.To keep the distributor in a long term service, it must ensure the quality of the grease / oil , the / oil to be used in strict accordance with the requirements of the system.

The engagement between the piston and the grease chamber in the distributor is more precise, the clearance fit tolerance is generally 3 μm. If poor quality grease is used, grease gap lubrication cycle (30 ~ 40 bar) under high pressure segregation phenomenon, namely crude oil from the soap separation, if the time is long enough , as more than seven days , the soap will solidified in the piston guide ring groove and the grease / oil chamber , which leads to the distributor in a blocked state even under the pressure of 300bar.

Specification:

Model
Nominal pressure
Oil feeding flow
Starting pressure
Outlet port
Weight
SSV-12
30Mpa
0.2 ml/Cycle
≤1.5Mpa
12
2.5kgs



Note: Using the medium for the cone is greater than 265 (25 ℃, 150g) 1/10mm, (NLGI0 # -2 #) of the grease. Such as the use of oil, viscosity grade than N68.

Code explanation:

SSV
12K
SSV= SSV series of progressive distributor blocks
12= Numbers of outlets, 8 outlet ports
K= With indicator; Without indicator if omit

SSV12 series of modular lubrication progressive distributor block dimensions:

Progressive Distributor Block

Model
A
Max. Medium Flow Rate(ml/min)
SSV-12
105
800

1.Outlet injectors : φ6 (Installed with the blocks)
2. Maximum pressure loss 10-20bar when grease through the working cell at25℃ temperature.

Model SSV12 series of progressive distributor blocks description:

Progressive Distributor Block
The grease/ oil enters into the distributor as per the direction of the arrow marked on the drawing above and transports to the end right of the piston A. The piston A moves to the left by the grease/oil pressure. The grease/oil in the position of piston A front left is transported to outlet 2 through internal passage of the house, reaches and lubricates the friction parts.

Progressive Distributor Block
The right end passage connection of piston B is open while the piston A reaches the position of left end. The grease/oil flows into the right position of piston B and pushes the piston B moving to the left. The grease/oil store in left front of piston B is delivered to the outlet 7 through internal passage of the house.

Progressive Distributor Block
The right end passage connection of piston C is open while the piston B reaches the position of left end. The grease/oil flows into the right position of piston C and pushes the piston C moving to the left. The grease/oil store in left front of piston C is delivered to the outlet 5 through internal passage of the house.

Progressive Distributor Block
The right end passage connection of piston D is open while the piston D reaches the position of left end. The grease/oil flows into the right position of piston D and pushes the piston D moving to the left. The grease/oil store in left front of piston D is delivered to the outlet 3 through internal passage of the house.

Progressive Distributor Block
The right end passage connection of piston D is open while the piston A reaches the position of left end. The grease/oil flows into the left position of piston A and pushes the piston A moving to the right. The grease/oil store in right of piston A is delivered to the outlet 1 through internal passage of the house.

When the piston B to D moves from the left to the right, according to the opposite direction above sequence of actions to complete a cycle and it will be restarting a new cycle.
Progressive Distributor Block
Modular lubrication progressive distributor block
How to use SSV12 series of modular lubrication progressive distributor block:

1. Recommended maximum through two-level distribution of lubricants in the system.
2. Outlets ports 1 and 2 should be never closed.
3. Always use the original injectors and outlets connection pipes.
4. Dismantling exchange the nozzle parts from of each side of the upper or the lower outlets.
5. The nozzle must be removed if the outlets need to be blocked, merge the volume of grease (Changing to lower outlet port), the M10x1 is used to block the injectors as per the drawing below for example.

Progressive Distributor Block

Category: Progressive Distributors

Related Category: Lubrication Distributor  Lincoln Lubrication Distributors  Lincoln Divider Valves  Lubrication Divider Valves  Lubrication Divider Blocks